Blinq Indoor CPE CAT12 w/WiFi AP 3.5 GHz

Blinq Part #FWC-145IN-35

Key Features

  • Supports TDD-LTE Mode Band 42/43 & 48* Supports 3GPP Release 12 Compliant
  • Supports up to UE LTE Downlink Category 12/ Uplink Category 13 PHY Rate **
  • Supports 4×4 MIMO with 40 MHz CA Maximum
  • Supports DL 256QAM with DL 2×2 MIMO only up to 4 Carrier Aggregation
  • Supports UL 2Tx (CDD / UL_CA/ UL_MIMO) Physical 2Tx & 8Rx in RF Front End
  • Supports 1.8V and 3V SIM and USIM Card for LTE Mode
  • Supports Dynamic Host Configuration Protocol
  • Built-in Web Server for Web-Based Configuration
  • Password Protected Access and Configuration
  • Supports IEEE 802.3, IEEE 802.3u, 802.3ab (10/100/1000 Mbps )
  • Supports up to 2 RJ-45 Giga Ethernet Port
  • Supports NAT/Tunnel/Bridge/Router Mode
  • Supports VPN Pass-Through and End Point
  • Supports 802.11 b/g/n (2 x 2)
  • Wi-Fi Technology
  • Supports 802.11 ac Wave 2 (2 x 2) Wi-Fi Technology

* B48 under FCC Part 96 requirement. No inter-band support for B42/43 + B48

** TDD Cat 12 with 4×4 + 40MHz carrier aggregation peak downlink throughput is around 440Mbps @ TDD Config 2 SSF 7 with 64QAM ; uplink throughput is around 30Mbps @ 20+20MHz TDD Config 2 SSF 7 with 64QAM

Contact Us

PCS Technologies is trained and certified to sell, install and service multiple product lines, saving your money and time while ensuring continuity and performance.

If you are an existing customer in need of assistance, please visit our support page.

or call